WiFi Bridge 300Mbps, 1KM Outdoor Point to Point Access for Users

Product Overview: SODOLA 2.4G 300Mbps Outdoor Wireless Bridge

Introduction to the SODOLA WiFi Bridge

The SODOLA 300Mbps WiFi Bridge, model CPE300K, is a robust outdoor CPE device designed to support the 2.4G full band. Compliant with 802.11b/g/n standards, this bridge delivers impressive speeds of up to 300Mbps. Featuring an LED digital display, it simplifies the process of establishing point-to-point or point-to-multipoint connections without the need for a computer. This device is also compatible with 24V Power over Ethernet (POE) and can accommodate a 12V 1A DC power supply, making it ideal for video and data transmission over short to medium distances. For any quality issues, we offer a one-year replacement guarantee.

Connecting Multiple Cameras for Surveillance

In surveillance setups with widely spaced cameras, you can configure a pair of bridges for each camera, linking them through a monitoring center via switches and connecting to the NVR. If the angle between the camera’s location and the monitoring center is less than 60 degrees, consider a point-to-multipoint configuration. This approach can effectively reduce costs associated with wireless bridges, provided that the angle and broadband internet access requirements are satisfied.

High-Speed Wireless Connectivity

The CPE300K adheres to 802.11b/g/n technology, offering a wireless access speed of up to 300Mbps. Operating on the 2.4GHz band, it is equipped with a 12dBi Dual Polarization High-Gain Directional Panel Antenna, providing a reliable 1KM Wi-Fi transmission range under ideal conditions.

Durable Design for All Weather Conditions

Constructed with an IP65 rating, this outdoor bridge features a waterproof and dustproof enclosure, along with built-in lightning protection IC. These features enable the bridge to operate efficiently across various weather conditions, ensuring stable performance at all times.

Optimized for Elevator Surveillance

To optimize elevator surveillance, install the bridge face-to-face for the best results. Ensure a separation of five digits between adjacent elevator shaft digital tubes (like 0-5-A, 1-6-B, 2-7-C) for optimal performance.

Easy Wall Mount Installation

Designed for user convenience, the SODOLA wireless bridge features a one-key bridge configuration process that simplifies the setup. Its wall-mounted design allows for easy installation, enabling efficient system configuration and streamlined networking services.

Power Supply and Connectivity Options

The SODOLA wireless bridge supports 24V Power over Ethernet (POE) with a distance capability of up to 80m, depending on cable material. It can also be powered via a 12V 1A DC supply, enhancing its versatility for short to medium-distance video and data transmission.

Technical Specifications of the 300Mbps WiFi Bridge

• Master Chip: MTK7628KN
• RAM: 8MB DDR
• Flash Memory: 1MB
• Dimensions: 140x75x34mm
• Wireless Technology: 2.4G (802.11b/g/n) 2T2R
• Antenna: Built-in 12dBi Dual Polarization High-Gain Directional Panel Antenna
• Wireless Speed: Up to 300Mbps at 2.4G
• Network Port: 1x10/100Mbps RJ45
• Power Options: DC 12V 1A / POE 24V 0.5A
• Buttons: Digital Switch, Reset, Toggle Switch
• Transmission Distance: 1KM
• Operating Conditions: -30°C to +55°C
• Waterproof Rating: IP65
• Signal Indicators: LED indicators for connection status and signal strength.

Energy Efficiency and Advanced Technology

This device supports IEEE802.3az, reducing power consumption by entering low-power mode in the absence of data frames. It adjusts energy usage based on port traffic, effectively saving up to 30% on power costs. Additionally, beamforming technology optimizes Wi-Fi bandwidth utilization, enhancing range and connection reliability.

We are dedicated to ensuring customer satisfaction and offer a product replacement service within one year to enhance your user experience.

product information: